 |
FOREVER LED CHRISTMAS LIGHTS |
|
| Outdoor Christmas Lights, LED Replacement Bulbs, Christmas Wreaths |
| HOME | STORE | CONTACT US |
|---|
Difference between Residential and Commercial LED Lights
The main difference is the end cords and the gauge or wire, here are the reasons to use Residential over Commercial
- COST the Residential has 70 LED Lights per set and the Commercial are all 25 lights
- CONVENIENT Male to Female end to end connection
- EASIER thinner wire makes for easier installation
- Ends connect to other electrical decorations
Note that the Commercial LED and the Residential Sets are the same both in size, brightness, sealed and so forth, the difference is in the end to end connection and the thickness of the wire
Each Male end has outlet for connection to next set of LED
Wire Spacing and Specifications for LED :
4" Spacing has 4" ends when you connect to the next set you will have aprox. 8" between the sets - distance from the first light to the very end is 7"
6" Spacing has 4" ends when you connect to the next set you will have aprox. 8" between the sets - distance from the first light to the very end is 7"
8" Spacing has 4" ends when you connect to the next set you will have aprox. 10" between the sets - distance from the first light to the very end is 7"
- 3 Amps
- 125 Volt (110V)
- 22 gauge Wire
- Male/Female End to End Connection
- UL, 4.8 Watts per Set
- 210 Watts end to end 44 sets using one outlet (plug In)
- 1st Year we Warranty - 3 Year Factory Warranty
- Energy Saving - Energy Star
- UV protected - Virtually unbreakable
LED Fuses are 3 AMP and are included with your LED Light Strings
- Unplug product from the receptacle
- Open the fuse cover by sliding away from the copper plug ends
- Remove the fuses carefully by turning plug over
- Replace fuse with fuses included (if used or discarded replace with a 3 Amp max fuse)
- Slide closed the fuse access cover on top of the plug
LED Questions:
- This product is for seasonal use 90 Days
- How long is the warranty -3 years from the date of purchase
- Can I use an extension cord with this product: Yes
- What is injected Molded Sealed Sets, The Lens is molded over the LED to seal the unit and make it waterproof. Bulbs that just pull out will corrode
- Difference between Full Wave and Half Wave LED: You can click the link above for all the information but to make it short a Full Wave LED is receiving full power which makes them brighter then half wave, they also do not flicker like most of the sets on the market.
- Our LIght Strings are Parallel Wired so if one was to go out the rest would stay on (these are warranted defects)
LED Safety Instructions:
- Read and Follow all safety instructions
- Do not use seasonal products outdoor without a GFCI Ground Fault Circuit Interrupter
- This seasonal product is not intended for permanent use or installation
- Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat. (LED's are cool to the touch)
- Do not secure the wiring of this product with staples or nails, or place on sharp hooks or nails
- This product is not intended for Children to use
- Do not close doors or windows on the product
- This product contains overload protection (fuse). A blown fuse indicates an overload or short circuit situation. See your electrician
- Read and Follow all the instructions that are on the product provided
If you questions have not been answered here please e-mail us and we will get back to you